10
Two functions are available in the menu:
Disarm all
Disarm selected
5.3
[Code]
– user menu
After you enter the code and confirm using the
list of available functions depends on the user authority level, as well as the system status
and configuration. In order to exit the user menu, press the
menu automatically, if 2 minutes have elapsed since the last keypress.
Upon entering the code and confirming with the
change the code or a service note may be displayed.
5.3.1 Functions list
The functions available after entering the service code have been highlighted with
white text against black background. Highlighted with a frame are functions available
to the administrators.
View clear. al.
System reset
Disarm
Clear alarm
Clear other al.
Abort voice m.
Arm
Arm (2 codes)
Disarm (2codes)
Defer auto-arm
Set auto-arm d.
Arming mode
Cancel 1st code
Change own code
Change prefix
Prefix normal
Prefix duress
Recall time
Users
New user
Code
Telephone code
Partitions
Type
Schedule
Existence time
Bypass time
Rights
Keypads etc.
New prox. card
Rem. prox. card
New DALLAS
Remove DALLAS
User Manual
disarming all partitions
disarming selected partitions
view cleared alarms from selected partition zones
restore system after verified alarm
disarm selected partitions
clear alarm
clear alarm in other objects
cancel telephone messaging
arm selected partitions
start two code arming
start two code disarming
postpone the auto-arming
set auto-arming postpone time
select arming mode
cancel consent to two code arming/disarming
change own code
set normally used prefix
set duress prefix
set time to remind of the need to change prefix
add new user
set code
set telephone code
assign partitions available to the user
select type of code
select time schedule
set code validity time
set bypass time
assign rights
assign modules available to the user
add proximity card
remove proximity card
add DALLAS iButton
remove DALLAS iButton
key, the user menu will be displayed. The
key. The keypad will quit the
key, a message about the need to
SATEL
Need help?
Do you have a question about the INTEGRA Plus and is the answer not in the manual?