Table 2-6 Thermostat Status Screen Options - Proliphix Professional NT100e/h Configuration Manual

CHAPTER 2: Configuring the Thermostat Using the TDI
Use

Table 2-6 Thermostat Status Screen Options

Field
Reset
Type
See the
HVAC Type
2-12
Table 2-6 to configure the Thermostat Status screen options.
Description
Press and hold the Reset button for three (3) seconds to perform a software
reboot.
Select either Fuel Burner (default) or Heat Pump. When selecting
between either Fuel Burner or Heat Pump or between Heat Pump and
Fuel Burner, the HVAC Mode must be set to OFF prior to selecting the
opposite setting. (See
Control Page (page
Fuel Burner – Fossil fuel systems which includes oil or gas-fired
boilers or furnaces.
Heat Pump SS – Electric heat pump (Single Stage) HVAC system
type.
Heat Pump DS O – Electric heat pump (Dual Stage O Rvs. Valve)
HVAC system type.
Heat Pump DS B – Electric heat pump (Dual Stage B Rvs. Valve)
HVAC system type.
Advanced Settings Page (page 3-35)
Displays the selected HVAC system type; Fuel Burner or Heat Pump.
Fuel Burner:
Heat Ctrl:
Disable – No heating system is present.
2H – Dual Stage heating is enabled.
1H – Single Stage heating is enabled.
Cool Ctrl:
Disable – No cooling system is present.
2C – Dual Stage cooling is enabled.
1C – Single Stage cooling is enabled.
Heat Pump:
Heat Ctrl:
Disable – No heating system is present (i.e. air conditioning only)
2H – Dual Stage heating is enabled.
1H – Single Stage heating is enabled.
Aux Heat – Auxiliary heat is enabled to augment the heat pump.
Cool Ctrl:
Disable – No cooling system is present (i.e. heat only)
2C – Dual Stage cooling is enabled.
1C – Single Stage cooling is enabled.
Professional Series Network Thermostat Configuration Guide, Release 3.0
Beta Draft Confidential
Changing the HVAC Setting (page 2-8)
3-9).
further explanation of the following parameters.
Part No. 600-01000-200, Rev. 2
or Status &