Table 2-1 Thermostat Buttons And Lcd Options - Proliphix Professional NT100e/h Configuration Manual

CHAPTER 2: Configuring the Thermostat Using the TDI
Table 2-1

Table 2-1 Thermostat Buttons and LCD Options

Button or LCD Option
Up arrow (multiple uses, screen
sensitive)
Down arrow (multiple uses,
screen sensitive)
Left button (multiple uses,
screen sensitive)
Middle button (multiple uses,
screen sensitive)
Right button (multiple uses,
screen sensitive)
Left button field
Middle button field
Right button field
Each thermostat displays content on the LCD screen. The LCD screen is organized
into primary and secondary (or sub) screens. Most of the Professional Series
thermostats have four primary screens. However, the NT100e/h has three primary
screens. This section describes the primary and secondary screens shown in
Figure 2-2 on page
2-2
Beta Draft Confidential
describes the thermostat buttons and LCD options.
Description
Increases the setpoint temperature settings. Scrolls up one field
in multi-field screens.
Decreases the setpoint temperature settings. Scrolls down one
field in multi-field screens.
Selects the function displayed on the LCD.
Selects the function displayed on the LCD.
Selects the function displayed on the LCD.
Displays the function to be controlled by the left button. In many
screens, this field is labeled Prev and enables you to access the
previous screen.
Displays the function to be controlled by the middle button. In
many secondary screens, this field is labeled Select and enables
you to select the highlighted field on the screen.
Displays the function to be controlled by the right button. In
many screens, this field is labeled Next and enables you to
access the next screen.
2-3.
Professional Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-200, Rev. 2