Figure 2-5 Changing The Hvac Setting - Proliphix Professional NT100e/h Configuration Manual

CHAPTER 2: Configuring the Thermostat Using the TDI
Figure 2-5
thermostat.

Figure 2-5 Changing the HVAC Setting

1
2
3
4
5
6
2-8
Beta Draft Confidential
shows an example of the process of changing HVAC settings at the
Select the middle HVAC button to enter the HVAC mode.
Select the middle Mode button to modify HVAC or fan settings.
Use the Down arrow to select Heat.
Press the middle Select button.
Press the right Back button to return to the default Thermostat screen.
Default Thermostat Status screen (see
Professional Series Network Thermostat Configuration Guide, Release 3.0
Figure 2-3 on page 2-4).
Part No. 600-01000-200, Rev. 2