Remote Management; Logging In To The Thermostat - Proliphix Professional NT100e/h Configuration Manual

CHAPTER 3: Configuring the Thermostat Using the TMI

Remote Management

You can manage the Professional Series thermostat using a web browser on a local
area network (LAN) or remotely though the Internet after proper authentication at the
Proliphix Web Site (www.proliphix.com).
If you use a VPN to access your thermostats remotely, the thermostats appear to
reside on the "local" network. In this case, you do not need to control the
Note
thermostats through the Proliphix Remote Management Service via the Proliphix
Web Site. If the Proliphix Remote Management Service is not used however, email
notification due to alarm conditions is not available.

Logging In to the Thermostat

To establish the identity of the thermostat for Remote Management capability:
(See the Proliphix Installer Remote Management Guide and the Proliphix Remote
Management User Guide for detailed information.)
Log in to the TMI as the Administrator as follows:
1
Username: admin
Password: admin (default)
Access the
2
Enter a Device Name and Site Name (for example, the name or location of the
3
property).
Click Submit.
4
Access the
5
Set the IP Address Method to Static and select a unique IP address, Subnet Mask,
6
Gateway, and HTTP port number.
Click Submit.
7
Access the
8
Click Submit.
9
3-4
Beta Draft Confidential
General Settings Page (page 3-14)
Network Settings Page (page
Remote Access Page (page
Professional Series Network Thermostat Configuration Guide, Release 3.0
through the TMI.
3-30).
3-49).
Part No. 600-01000-200, Rev. 2