Sensor Settings Page; Figure 3-16 Sensor Settings Page - Proliphix Professional NT100e/h Configuration Manual

CHAPTER 3: Configuring the Thermostat Using the TMI

Sensor Settings Page

From the Sensor Settings page, you can add external thermal sensors and configure
zone temperature thermal averaging of the Local or the two Remote Sensors.
This page is not available on the NT100e/h Network Thermostat because the
NT100e/h does not support external thermal sensors.
Note

Figure 3-16 Sensor Settings Page

3-46
Beta Draft Confidential
Professional Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-200, Rev. 2