Figure - Proliphix Professional NT100e/h Configuration Manual

Beta Draft Confidential
Day Class Schedules
Figure 3-5 on page 3-19
Schedules in the Day Class Schedules table. The TMI displays the day class periods
and period start times within each row of the table. The TMI also displays the heat and
cool settings for each period in each day class. Although the thermostat ships from the
factory with pre-set day class period temperature settings, you can change these
settings by clicking on the Day Class heading (i.e. Occupied, Unoccupied, and
Other).
You can edit the Day Class headings on the NT130e/h and NT160e/h models only
by highlighting the heading and entering a new heading. Each heading may
Note
contain a maximum of 10 characters and the Default Weekly Schedule table
displays up to the first 5 characters of the assigned heading.
Default Weekly Schedule
In Figure 3-5 on page
that you can use to apply the three day classes to each day of the week, for every week
of the year. The TMI applies this weekly template to every week in each month that is
visible in the Calendar View table at the bottom of the
3-19).
To edit the Default Weekly Schedule, click Edit Weekly Schedule and continue with
Default Weekly Schedule (page
Calendar View
The Calendar View table displays the day class settings for each day of the month.
You can modify any day class in the Calendar View table using any of the following
three methods:
Professional Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-200, Rev. 2
displays Occupied, Unoccupied, and Other Day Class
3-19, the Default Weekly Schedule table provides a template
Click on the date within the calendar and continue with
page 3-25.
Click Edit Special Days and continue with
Setback Schedules Page (page
3-24).
Schedule Special Days
Setback Schedules Page
Schedule Special Days on
on page 3-25.
3-21