Table 3-2 General Settings Field Descriptions - Proliphix Professional NT100e/h Configuration Manual

Beta Draft Confidential
Use
location and enable or disable alarm settings and filter replacement reminders.

Table 3-2 General Settings Field Descriptions

Field
Zone Name
Device Name
Site Name
Thermostat
Serial Number
SW Ver / HW Rev
Temperature Scale
Backlight
Display Contrast
Button Lockout
Professional Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-200, Rev. 2
Table 3-2 to set the General Settings parameters such as the thermostat name and
Description
Enter a unique 13 character identifier for the thermostat. You can
use the thermostat location in this field (i.e. Main Lobby). This
identifier is known as the host name within the data network.
Enter a 25 alpha-numeric character name used to identify the
thermostat if more than one thermostat intercommunicates with
the Proliphix Web Server. (See the Proliphix Remote Access
Guide.)
Displays an eight digit alpha-numeric thermostat serial number
(e.g. 8438F399).
Displays the software version / hardware revision .
Select either the Fahrenheit or Celsius temperature scales.
Fahrenheit (default) – All thermostat temperature readings
and reporting are displayed in the Fahrenheit temperature
°
scale ( F).
Celsius – All thermostat temperature readings and reporting
are displayed in the Celsius temperature scale (
Select the LCD backlight control.
Delay (default) – The backlight is illuminated when you
click a button and remains illuminated for 16 seconds after
the last button is clicked.
Off – The backlight is disabled from activation. An ambient
backlight remains visible.
Select a value between 20 (lowest contrast between the graphics
characters and the background) and 40 (highest character
contrast to the background) to indicate the LCD display contrast
control.
20, 22, 24, 26, 28 (default), 30, 32, 34, 36, 38, 40
Select Enable or Disable to indicate the Button Lockout status.
When enabled, this feature prevents a user from directly altering
the settings of the thermostat from the thermostat's button
interface. The button lockout icon appears on the thermostat
LCD screen.
Disable (default) – Allows normal thermostat button
activity.
Enable – Prevents unwanted user access at the thermostat
button interface except for limited or no temperature
adjustments.
General Settings Page
°
C).
3-15