Concluding Steps - Fujitsu PRIMERGY RX100 S8 Upgrade And Maintenance Manual

System board and components
Figure 199: Removing the TPM spacer
Ê Using a flat nose pliers, press together the hooks on the TPM spacer (1, see
close-up) and remove it from the system board (2).
I
If the TPM is to be replaced, the TPM spacer may remain on the
system board.

14.4.2.3 Concluding steps

"Installing the new system board" on page 267
Ê
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 55
Ê
"Switching on the server" on page 57
Ê
260 Upgrade and Maintenance Manual
RX100 S8