Expansion cards and backup units
9.4.4.3
Installing the new riser card
Figure 112: Installing the riser card - example riser module 1
Ê Insert the riser card (1).
Ê Fasten the riser card with two screws (2).
Ê Install the expansion card as described in section
card" on page
9.4.4.4
Concluding steps
Ê Install the corresponding riser module as described in section
riser modules" on page
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 55
Ê
"Switching on the server" on page 57
Ê
178
172.
58.
Upgrade and Maintenance Manual
"Installing the expansion
"Handling
RX100 S8