Removing The Defective Processor - Fujitsu PRIMERGY RX100 S8 Upgrade And Maintenance Manual

Processor
Ê Remove the residual thermal paste from the underside of the heat sink and
the surface of the processor.
Ê Clean the underside of the heat sink and the surface of the processor using
a lint-free cloth.

11.2.3 Removing the defective processor

Figure 145: Opening the lever
Ê Press down the lever (1) and unhook it.
Ê Open the lever (2).
Figure 146: Opening the holder
Ê Take the holder by the small grip (1) and open it (2).
214 Upgrade and Maintenance Manual
RX100 S8