Minimum Startup Configuration - Fujitsu PRIMERGY RX100 S8 Upgrade And Maintenance Manual

16.4

Minimum startup configuration

Field Replaceable Units (FRU)
If the server does not start up or other problems occur, it may be necessary to
take the system down to its most basic configuration in order to isolate the
defective component.
The minimum startup configuration consists of the following components and
cables:
Component
System board
CPU with CPU heat sink
1 memory module
Front panel module
Power supply unit
Table 5: Minimum startup configuration - components
Cable
Front panel cable
Power cable
Table 6: Minimum startup configuration - cables
"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
Ê Take the system down to its minimum startup configuration.
"Connecting the server to the mains" on page 55
Ê
Ê Connect a keyboard, mouse and display to the server.
Ê Switch on the server as described in section
page 57.
RX100 S8
Notes
no TPM, UFM or expansion cards installed
installed in DIMM slot 1A
Notes
Upgrade and Maintenance Manual
"Switching on the server" on
Appendix
295