Installing 2.5-Inch Hdd/Ssd Modules; Preliminary Steps; Removing A 2.5-Inch Hdd/Ssd Dummy Module - Fujitsu PRIMERGY RX100 S8 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.2.5

Installing 2.5-inch HDD/SSD modules

Customer Replaceable Unit
(CRU)
Tools: tool-less
7.2.5.1

Preliminary steps

Ê Locate the correct drive bay as described in section
configurations" on page
7.2.5.2

Removing a 2.5-inch HDD/SSD dummy module

I
In configuration with only one 4 x 2.5-inch HDD backplane dummy locks
are installed to make it impossible to equip the bays with no HDD
backplane behind.
Figure 51: Removing dummy lock
Ê Only valid after upgrading the server with the second HDD backplane: pull
the dummy lock out of the dummy cover. Please be aware that the dummy
lock can be damaged.
118
115.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"2.5-inch HDD/SSD
RX100 S8