Removing The Bbu With The Holder; Removing The Bbu From The Holder - Fujitsu PRIMERGY RX100 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.3.2

Removing the BBU with the holder

Figure 134: Removing the BBU with the holder
Ê Lift up the green locking handle on the holder (see circle) while sliding the
holder in direction of the arrow as far as it will go.
I
After that, the shoulder screw caps on the chassis floor will rest in the
wide ends of the keyhole slots on the holder.
Ê Lift the holder out of the chassis.
9.5.3.3

Removing the BBU from the holder

Figure 135: Removing the BBU from the holder
Ê Fold up the BBU (1) and at a slight angle remove it from the holder (2).
196 Upgrade and Maintenance Manual
RX100 S8