Hardware Compatibility; Stacking - Avaya C360 Installation And Configuration Manual

Mixed Stacks

Hardware Compatibility

This section describes hardware compatibility issues.

Stacking

Tip:
It is recommended to put the C360 switches at the bottom or top of a mixed stack
Tip:
for easier connection of cables.
You may use the same Octaplane cables for stacking all the switches. However, the stacking
modules are not interchangeable. Please refer to
module to use.
1. You should use Stacking Modules version C/S:1.x or higher.
214 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Table 37: Stacking Module Compatibility
Switch
C360
G700
P333T-PWR
P332G-ML
P332GT-ML
Table 36 for information on which stacking
Stacking Module
X360STK (refer to Installing the
X360STK Stacking Module
page 41 for further information)
1
X330STK
1
X330STK
X330STK-ML
X330STK-ML
on