Hardware Nvram Initialization - Avaya C360 Installation And Configuration Manual

Maintenance

Hardware NVRAM Initialization

If you wish to perform a hardware NVRAM initialization, then perform the following steps:
!
CAUTION:
C360 switches and stacking modules contain components sensitive to
CAUTION:
electrostatic discharge. Touching the circuit boards unless instructed to do so
may damage them.
!
PRECAUCIÓN:
El switch C360 y sus módulos de ampliación contienen componentes sensibles a
PRECAUCION:
descargas electrostáticas. Tocar las tarjetas sin autorización del personal técnico
puede dañarlas.
!
CAUTION:
Do not leave the stacking slots open. Cover empty slots using the blanking plates
CAUTION:
supplied.
!
PRECAUCIÓN:
No deje las aberturas de ampliación abiertas. Cubrir las aberturas vacias con las
PRECAUCION:
placas bloqueadoras proporcionadas con el equipo.
1. Remove the bridge from the jumper labelled "SPARE JUMPER" on the PCB.
2. Bridge the NVRAM INIT jumper before inserting the X360STK module.
- See Figure 37
208 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
for the location of the jumpers.