Ip Configuration; Ip Configuration Cli Commands - Avaya C360 Installation And Configuration Manual

Avaya C360 Layer 3 Features

IP Configuration

IP Configuration CLI Commands

162 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Enable IP routing
Set ICMP error messages
Specify the format of netmasks
in the show command output
Create and/or enter the
Interface Configuration Mode
Assign an IP address and mask
to an interface
Set the administrative state of
an IP interface
Update the interface broadcast
address
Define a default gateway
(router)
Define the interface RIP route
metric value
Enable net-directed broadcast
forwarding
Set the IP routing mode of the
interface
Enable or disable the sending of
redirect messages on the
interface
Check host reachability and
network connectivity
Trace route utility
Create a router Layer 2 interface
Use the following command...
ip routing
ip icmp-errors
ip netmask-format
interface
ip address
ip admin-state
ip broadcast-address
ip default-gateway
default-metric
ip directed-broadcast
ip routing-mode
ip redirect
ping
traceroute
set vlan (Layer 3)
1 of 2