Switch Configuration
Monitoring CPU Utilization
The C360 provides you with the ability to monitor CPU utilization on each module of the stack.
Use the CLI commands briefly described below for enabling and disabling CPU utilization
monitoring and viewing CPU utilization statistics. The rules of syntax and output examples are
all set out in detail in the Reference Guide for the Avaya C360 Converged Stackable Switch,
10-300506.
110 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Enable CPU utilization
monitoring on a module or stack
Disable CPU utilization
monitoring on a module or stack
Display CPU utilization statistics
for a module or stack
Use the following command...
set utilization cpu
clear utilization cpu
show utilization