Configure Mode; Router Rip Command; Table 7.3 Rip Commands - Avaya P334T-ML User Manual

RIP Commands
Table 7.3
Command
router rip
network
redistribute
ip rip rip-version
ip rip default-metric
ip rip send-receive-mode
ip rip default-route-mode
ip rip poison-reverse
ip rip split-horizon
ip rip authentication mode
ip rip authentication key

Configure Mode

router rip Command

Use the router rip command to configure the Routing Information Protocol
(RIP). The no form of this command disables RIP. The default state is disabled.
The syntax for this command is:
[no] router rip
Example:
To enable the RIP protocol:
Router-N(configure)# router rip
P334T-ML User's Guide
RIP Commands
Chapter 7 CLI – Layer 3
Page
177
178
178
179
179
180
180
181
181
181
182
177