Cisco TelePresence 7010 Help Manual page 41

Configuration
If this is a new TelePresence Server it should already be activated; if it is not, or if you have upgraded to a
newer firmware version, or if you are enabling a new feature, contact your supplier to obtain the appropriate
activation key.
Each key is unique to a particular TelePresence Server. Ensure that you know the device's serial number
when you request the key, so that the supplier can give you a valid key.
Applying the key is the same process whether you are activating the TelePresence Server or enabling an
advanced feature.
To apply a key to the TelePresence Server:
1. Read the Feature management list to check whether the feature is already active.
The product activation key is also in this list.
2. Enter the key given to you by your supplier into the Add key field exactly as you received it, including any
dashes.
3. Click Add key.
The browser window refreshes to list the newly added feature and the key you entered.
If the key is not valid, you are prompted to re-enter it.
Keys may be time-limited. If this is the case, an expiry date will be displayed, or a warning that the feature
has already expired. Expired keys remain in the list even though the corresponding features disabled.
4. Record the key in case you need to re-enter it in the future.
Successful TelePresence Server or feature activation has immediate effect and will persist even if the
TelePresence Server is restarted.
Note that you can remove some types of features. Click remove, next to the key, to remove a feature.
Applying screen licenses
To license a TelePresence Server MSE 8710, you must log in to the Supervisor and allocate screen licenses
to the blade slot. The screen licenses are linked to the chassis serial number. See the
documentation for details.
For the TelePresence Server 7010, the screen license key is linked to the TelePresence Server's hardware
serial number. You enter the License key directly on the TelePresence Server in the same way as you add
feature keys (the procedure detailed above).
Upgrading the font
Your TelePresence Server may be shipped with the TrueType font pre-installed. You can check this on the
Status or Configuration > Upgrade
with a banner across the top of the user interface.
To use TrueType text rendering on your TelePresence Server instead of the default text rendering method,
you must upload the font file which is supplied by your TelePresence Server vendor.
Note: You should do this when the TelePresence Server is not heavily loaded. Also, you must use the
supplied font; do not attempt to load a different font file.
1. Locate and select your font file.
The button may be Browse... or Choose File or similar, depending on your browser.
Cisco TelePresence Server 7010 and MSE 8710 in Remotely Managed Mode Printable Help (4.0)
pages. If the font is not present, the TelePresence Server warns you
Supervisor
Page 41 of 92