Cisco TelePresence 7010 Help Manual page 51

Telepresence server 7010 and mse 8710 in remotely managed mode
Hide thumbs Also See for TelePresence 7010:
Table of Contents

Advertisement

Conferences
Table 31: Previous participants (continued)
Field
Field description
Reason for
Why the endpoint is no longer part of the
disconnection
conference.
Cisco TelePresence Server 7010 and MSE 8710 in Remotely Managed Mode Printable Help (4.0)
Usage tips
The TelePresence Server may have
disconnected the endpoint for one of the
following example reasons:
requested by administrator: the endpoint has
n
been disconnected by an administrator
call rejected: the far end rejected the call.
n
left conference: the endpoint has been
n
disconnected at the end of a conference
requested via API: the endpoint has been
n
disconnected via the API
no answer: the endpoint did not answer the
n
call
busy: the endpoint has failed to connect
n
because it was busy (for SIP calls this could
also mean that the endpoint rejected the
call).
gatekeeper error: a gatekeeper error
n
occurred whilst trying to establish call.
destination unreachable The endpoint was
n
unreachable.
DNS failure: DNS lookup failed, or the H.323
n
gatekeeper could not find the alias
requested.
Encryption not supported by far end:
n
encryption required for the call but the far
end does not support it or encryption
forbidden for this call but far end requires
encryption.
timeout: Connection timed out.
n
insufficient free ports: the endpoint has been
n
disconnected because there are insufficient
free ports
conference port limit reached: the endpoint
n
has been disconnected because the
conference port limit has been reached
Conference locked: the call could not
n
connect to the conference as it is locked.
Product not activated: the call could not be
n
made/accepted as there is no activation key
installed on the TelePresence Server.
Protocol error: the endpoint has been
n
disconnected due to a protocol error
Network error: the endpoint has been
n
disconnected due to a network error
Unavailable: the endpoint is unavailable
n
Capability negotiation error: the endpoint
n
and the TelePresence Server are unable to
negotiate a mutually compatible call set up.
Page 51 of 92

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence mse 8710

Table of Contents