Cisco TelePresence 7010 Help Manual page 24

Network settings
Table 15: Network > Services field descriptions (continued)
Field Field description
HTTPS Enable/disable secure (HTTPS) web access
on the specified interface or change the port
that is used for this service.
Incoming Enable/disable the ability to receive incoming
H.323 calls to the TelePresence Server using H.323
or change the port that is used for this service.
SIP (TCP) Allow/reject incoming calls to the
TelePresence Server using SIP over TCP or
change the port that is used for this service.
Encrypted SIP Allow/reject incoming encrypted SIP calls to
(TLS) the TelePresence Server using SIP over TLS
or change the port that is used for this service.
FTP Enable/disable FTP access on the specified
interface or change the port that is used for
this service.
SIP (UDP) Allow/reject incoming and outgoing calls to
the TelePresence Server using SIP over UDP
or change the port that is used for this service.
Minimum The lower limit of the ephemeral port range.
Maximum The upper limit of the ephemeral port range.
Cisco TelePresence Server 7010 and MSE 8710 in Remotely Managed Mode Printable Help (4.0)
Usage tips
By default, the TelePresence Server has its
own SSL certificate and private key. However,
you can upload a new private key and
certificates if required. For more information
about SSL certificates, refer to
SSL certificates.
This field is only visible if the TelePresence
Server has the Encryption feature key
installed. For more information about installing
feature keys, refer to Upgrading and backing
up the TelePresence Server.
Disabling this option will not prevent outgoing
calls to H.323 devices being made by the
TelePresence Server.
Disabling this option will not prevent outgoing
calls to SIP devices being made by the
TelePresence Server.
Disabling this option will not prevent outgoing
calls to SIP devices being made by the
TelePresence Server.
This field is only visible if the TelePresence
Server has the Encryption feature key
installed. For more information about installing
feature keys, refer to Upgrading and backing
up the TelePresence Server.
FTP can be used to upload and download
TelePresence Server configuration.
You should consider disabling FTP access on
any port that is outside your organization's
firewall.
If you require advanced security for the
TelePresence Server, disable FTP access.
Disabling this option will prevent calls using
SIP over UDP.
Defaults to 49152, though you can set it as low
as 10000 or as high as 60535.
Defaults to 65535, though you can set it as low
as 15000. The minimum range is limited to
5000 ports.
Configuring
Page 24 of 92