Api Clients - Cisco TelePresence 7010 Help Manual

Logs
API clients
The TelePresence Server logs the ten most recent API clients that have made requests to the unit. To see
this list, click Logs > API clients.
Clients that have not made an API request for more than five minutes will appear greyed out.
Click Refresh to update the list of API clients. To clear all data, click Reset statistics. This clears the
current list of API clients. As clients send new commands, they will reappear in this list.
By default the page is sorted by the Time since last request column.
Table 41: API client details
Field
Client IP
Time since last request
Last request method
Last request user
Requests received since last
reset
Cisco TelePresence Server 7010 and MSE 8710 in Remotely Managed Mode Printable Help (4.0)
Field description
The IP address of the client sending
the request.
The time since the last request was
sent by that client.
The last API request method sent by
that API client.
The username that the client used in
their API request.
The number of requests received
since the last reset.
Usage tips
Clients whose last API request failed
authentication will be flagged up here
with (authentication failed).
If more than one request is received
per second then the average number
of requests per second is displayed
in ().
The current threshold is 1.8 requests
per second.
'Overactive' clients are only flagged
up if they are currently
communicating with the
TelePresence Server.
The elapsed time since the last reset
is shown below the table, beside the
buttons.
Page 72 of 92