Event Rmon Group; Event Table; Log Table - Cisco ONS 15600 Reference Manual

Chapter 13 SNMP

13.10.6 Event RMON Group

The event group controls event generation and notification. It consists of two tables: the eventTable,
which is a read-only list of events to be generated, and the logTable, which is a writable set of data
describing a logged event. The ONS 15600 SDH implements the logTable as specified in RFC 2819.

13.10.6.1 Event Table

The eventTable is read-only and unprovisionable. The table contains one row for rising alarms and
another for falling ones. This table has the following restrictions:
•
•
•
•

13.10.6.2 Log Table

The logTable is implemented exactly as specified in RFC 2819. The logTable is based upon data that is
locally cached in a controller card. If there is a controller card protection switch, the existing logTable
is cleared and a new one is started on the newly active controller card. The table contains as many rows
as provided by the alarm controller.
78-18400-01
The eventType is always "log-and-trap (4)".
The eventCommunity value is always a zero-length string, indicating that this event causes the trap
to be sent to all provisioned destinations.
The eventOwner column value is always "monitor."
The eventStatus column value is always "valid(1)".
Cisco ONS 15600 SDH Reference Manual, Release 9.0
13.10.6 Event RMON Group
13-21