Cisco TelePresence 7010 Help Manual page 49

Conferences
Table 29: Status (continued)
Field Field description
URIs The URI(s) assigned to the conference.
Conference Indicates whether the conference is locked.
lock status
Content Whether the content channel is currently in
use.
Table 30: All participants
Field Field description
Endpoint The names of the endpoints currently
participating in the active conference.
Type The endpoint type.
Authority Either Chair or Guest, to indicate the
participant's role (and associated authority) in
the conference.
Cisco TelePresence Server 7010 and MSE 8710 in Remotely Managed Mode Printable Help (4.0)
Usage tips
In remotely managed mode the TelePresence
Server does not register individual conference
URIs to a gatekeeper.
Conferences can have up to 2 multi-use URIs
which participants can dial. If the URI is PIN
protected this status will be shown.
Individual participants can have their own URI
(s) which they dial. These are not displayed in
this list.
One of:
No current presentation: content sharing is
n
enabled for the conference but there is no
active contributor
Presentation from <endpoint display name>:
n
there is an active contributor of content
For more information, see
support.
Usage tips
If the conference is not active, this section
shows No endpoints.
To remove a participant from the conference:
select the appropriate check box and select
Disconnect selected
Click on the endpoint's name to go to its
Status page.
This defaults to Chair for all participants unless
the managing system has explicitly applied
chair/guest control levels to this conference.
Content channel
Page 49 of 92