Displaying Cluster Status On A Master Telepresence Server - Cisco TelePresence 7010 Help Manual

System status
Displaying cluster status on a master
TelePresence Server
To display cluster status, go to
Note: This cluster related page is only available if your TelePresence Server is in a cluster.
Cluster status is only available for blades that are configured on the Cisco TelePresence Supervisor
MSE 8050 to be part of a cluster. For more information about clustering, refer to
The table below describes the
cluster. For details about slave blades, see
Table 7: Cluster status
Field Field description
Slot The number of the slot in the Cisco TelePresence
MSE 8000 chassis that corresponds to this row in the
table.
IP The IP addresses of the slave blades, or Master blade
in the case of the master.
Cisco TelePresence Server 7010 and MSE 8710 in Remotely Managed Mode Printable Help (4.0)
Status > Cluster.
Status > Cluster page that displays for the master TelePresence Server in a
Displaying cluster status on a slave TelePresence Server
Understanding clustering.
Usage tips
To configure a blade as a master or a
slave in a cluster, log in to the
Supervisor.
You can click the IP address to go to the
slave's cluster page.
[p.14].
Page 11 of 92