Cisco TelePresence 7010 Help Manual page 61

Users
Adding and updating users
You can add, edit and delete user accounts on the TelePresence Server by accessing the list of users (go to
Users.)
Most of the information that you use when adding or editing user accounts is identical; any differences are
explained in the following reference table.
Adding a user
1. Go to Users.
2. Click Add new user.
3. Supply the user account details, referring to the following table if necessary.
4. Click Add user.
Updating a user
1. Go to Users.
2. Click a User ID.
3. Modify the user account details, referring to the following table if necessary.
4. Click Modify user.
5. If you need to change the password, click Change password.
User details reference
Table 37: User details
Field Field description
User ID Identifies the log-in name or ID number of the
user.
This value is the username required to
access the TelePresence Server.
Name The name of the user.
Password Type a password for this user.
Re-enter Retype the password.
password
Cisco TelePresence Server 7010 and MSE 8710 in Remotely Managed Mode Printable Help (4.0)
More information
Although you can enter text in whichever
character set you require, note that some
clients do not support Unicode characters.
Note: The TelePresence Server's console
cannot accept all Unicode characters.
Accounts used for console access are limited
to ASCII characters for username and
password.
Optional.
Although you can enter text in whichever
character set you require, note that some
clients do not support Unicode characters.
The password entry fields are only active by
default when you add a new user. If you are
updating an existing user, click Change
password to enable editing in these fields.
Page 61 of 92