Event Display Filter - Cisco TelePresence 7010 Help Manual

Logs

Event display filter

You can use the event display filter to view a subset of the event log or highlight particular entries. This filter
works on stored entries, it does not affect
To modify the event display filter, go to
Message text filtering
1. Enter a Filter string to display only the stored events that contain that string.
2. Enter a Highlight string if you want to easily see the string within the filtered results.
3. Click Update display.
The TelePresence Server displays the filtered and highlighted event log.
Current display levels
There are many sub-systems of the TelePresence Server which can all log events. You can modify the level
of detail you want to see for each sub-system or for all sub-systems.
For example, if you were only interested in SIP errors:
1. Scroll to the bottom of the page where you can see the Set all to: button and the dropdown next to it.
2. Select None on the dropdown.
3. Click Set all to:.
The display level changes to None for all sub-systems.
4. Select Errors only from the dropdown next to the SIP sub-system.
5. Click Update settings.
The TelePresence Server displays only SIP errors.
Cisco TelePresence Server 7010 and MSE 8710 in Remotely Managed Mode Printable Help (4.0)
which events are captured.
Logs > Event display filter.
Page 66 of 92