Clock And Autoclean; Figure 1-5 Autoclean Display - Honeywell 9782 Series Operator's Manual

Conductivity/Resistivity Analyzer/Controller

Clock and AutoClean

If the 24-hour clock is turned on, a time display will be available. If AutoClean is configured,
then the AutoClean screen will be included in the display cycle (see Figure 1-5). When
AutoClean is active, the screen will display the time remaining. When this screen is on display,
the function keys can be used to control the AutoClean operation as described in 1.3.1.
1-10 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator's Manual
AUTO CLEAN
TIME REMAINING
01: 58:29
ALARM STRIPE
START PAUSE

Figure 1-5 AutoClean Display

STOP
7/99