Specifying A Tagname Or Other Display String; Introduction; Procedure; Table 10-2 Procedure For Specifying A Tagname Or Other Display String - Honeywell 9782 Series Operator's Manual

Conductivity/Resistivity Analyzer/Controller

10.3 Specifying a Tagname or Other Display String

Introduction

The real-time displays of process values show the instrument's tagname (or other configurable
fixed nineteen-character string) at the top of the screen.

Procedure

Use the procedure in Table 10-2 to specify the text to be displayed on the alarm stripe when no
alarms or other messages are active.

Table 10-2 Procedure for Specifying a Tagname or Other Display String

Step
MENU
1
CONFIGURATION
CALIBRATION
MAINTENANCE
I/O SETUP
DIAGNOSTICS
| PREV | NEXT
MAINTENANCE
OFFLINE FUNCTIONS
INSTRUMENT SETUP
LEAD RESISTANCE COMP
DIAGNOSTICS
| PREV |
INSTRUMENT SETUP
INSTRUMENT TAGGING
PRODUCT INFO
SCREEN CONTRAST
SECURITY
RESET UNIT
DIAGNOSTICS
| PREV |
2
UPDATE TAG DATA
HONEYWELL INC
DIAGNOSTICS
| <--
10-6 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator's Manual
Screen
Go to MAINTENANCE | INSTRUMENT SETUP |
INSTRUMENT TAGGING.
NEXT
NEXT
The text string currently stored in memory will be
displayed.
If desired, edit the string (nineteen characters maximum)
using the UP and DOWN keys, and the <-- and --> function
| -->
keys.
Press ENTER or MENU to exit.
Action
7/99