Combined Display; Computed Value; Figure 1-3 Representative Combined Display; Figure 1-4 Representative Computed Value Display - Honeywell 9782 Series Operator's Manual

Combined display

If two cells are connected to the Analyzer/Controller, then a display is available that includes the
measured variable for both cells (see Figure 1-3). Another combined display also includes the
temperature measured by each cell.

Computed value

If the Analyzer/Controller is configured to calculate a computed value such as the ratio between
the cells' readings, a screen will be available to display the value, along with a label (see Figure
1-4).
7/99 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator's Manual
MIXED BEDS
C1 0.58
C2 0.25
ALARM STRIPE
NC CAL

Figure 1-3 Representative Combined Display

CATION TRAIN A
0.67
RATIO
ALARM STRIPE
NC CAL

Figure 1-4 Representative Computed Value Display

1 AND 2
TC
µS
µS
ACK
ACK
Introduction
1-9