Protected Setup Navigation Buttons; System Settings Page - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

Protected Setup Navigation Buttons

The Protected Setup Navigation Buttons (FIG. 56) appear on the left edge of the Protected Setup page.
FIG. 56 Protected Setup Navigation Buttons

System Settings Page

The System Settings page (FIG. 57) displays sets the NetLinx Master's communication settings.
FIG. 57 System Settings page
The elements of this page include:
System Settings Page
Back:
WiFi/Wired/USB Icon:
Connection Status Icon:
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom, 5.2 and 5"
Press to access the System Settings page, which contains IP Settings and Master
Connection information.
Press to access the Wireless Settings page, which allows configuration of wireless
connection settings.
Press to access the Calibrate page, which allows proper calibration of the panel.
Press to access the G4 Web Control page, which enables and disables remote
display and control of the panel via a web-enabled PC running a VNC client.
Press to access the Passwords Setup page, to specify firmware
and user access passwords.
Press to access the Tools page, for panel connection logs, panel statistics,
and the Connection Utility.
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna), Wired (image
of three networked computers), or USB (USB connection symbol).
The icon in the upper-right corner of each Protected Setup page provides a
constant visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Protected Setup Pages
57