Security Settings - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

2.
Press the Shutdown button.
3.
Disconnect any power source plugs or USB connections, if necessary.

Security Settings

The Security button on the Protected Setup page has three settings: Standard, Secure, and DoD. Pressing the
button opens the Panel Security Setting popup window (FIG. 55)
FIG. 55 Panel Security Setting popup window
Each of the settings has different features for touch panel security:
Security Profile Features
Standard:
Secure:
DoD:
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom, 5.2 and 5"
• Factory default, shipped in this configuration.
• Default Protected Setup Password is " 1988 ".
• Remote login uses Telnet.
• Default Protected Setup Password is "Amx1234!".
• Minimum password requirement is 8 characters with at least one numeric character.
• Remote login uses SSH.
• Remote login user name is " amx ".
• Login failure attempt pauses 4 seconds before another login attempt is allowed.
• After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15
minutes.
• Login and logout audit logging is enabled.
• Default Protected Setup Password is " Amx1234! ".
• Minimum password requirement is 8 characters with at least one numeric character,
one uppercase character, one lower case character, and one special character, with
no duplicate adjacent characters.
• Remote login uses SSH.
• Remote login user name is " amx ".
• Login failure attempt pauses 4 seconds before another login attempt is allowed.
• After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15
minutes.
• Login and logout audit logging is enabled.
• DoD login banner is enabled.
Protected Setup Pages
55