Panel Information Page - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

Panel Information Page

The Panel Information page provides detailed panel information (FIG. 49).
FIG. 49 Panel Information page
Features on this page include:
Panel Information Page
Back:
WiFi/Wired/USB Icon:
Connection Status icon:
Panel Type:
Firmware Version:
Setup Port:
High Port:
High Address:
High Channel:
High Level:
Serial Number:
Setup Pages Version:
Panel Start Time:
Bulb Hours:
Screen Width:
Screen Height:
Screen Refresh Rate:
Screen Rotation:
Power Up Page:
Start Up String:
Wake Up String:
Sleep String:
Stand By String:
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom, 5.2 and 5"
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna), Wired (image
of three networked computers), or USB (USB connection symbol).
The icon in the upper-right corner of each Setup page provides a constant
visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Displays the model of the panel being used.
Displays the version number of the G4 firmware loaded on the panel.
Displays the setup port information (value) being used by the panel.
Displays the high port (port count) value for the panel.
Displays the high address (address count) value for the panel.
Displays the high channel (channel count) value for the panel.
Displays the high level (level count) value being used by the panel.
Displays the specific serial number value assigned to the panel.
Displays the type and version of the Setup pages being used by the panel.
Displays the time taken by the panel to wake up from sleep mode.
Displays the number of hours elapsed with the display on full power.
Displays the screen width (in pixels). MVP-5200i = 640 pixels.
Displays the screen height (in pixels). MVP-5200i = 480 pixels.
Displays the video refresh rate applied to the incoming video signal.
Displays the degree of rotation applied to the on-screen image.
Displays the page assigned to display after the panel is powered-up.
Displays the start-up string.
Displays the wake up string used after an activation from a timeout.
Displays the sleep string used during a panel's sleep mode.
Displays the stand by string used during a panel's Stand By mode.
Setup Pages
45