Power / Sleep Led; System Status Led; Table 19. Ssi Power Led Operation; Table 20. System Status Led Indicator States - Intel SR1630BC Technical Product Specification

Intel® Server System SR1630BC
LED
Disk Activity
The current limiting resistors for the power LED, system fault LED, and NIC LEDs are located
®
on the Intel Server Board S5500BC.
6.1.1

Power / Sleep LED

State Power Mode
Power Off Non-ACPI
Power On Non-ACPI
S5 ACPI
S3-S1 ACPI
S0 ACPI
Note:
1. The blink rate is ~ 1Hz with at 50% duty cycle.
6.1.2

System Status LED

Color State
Off N/A
Green Solid on
Green Blink
Revision 1.3
Color
Green Random blink
Off

Table 19. SSI Power LED Operation

LED
Off System power is off, and the BIOS has not initialized the chipset.
On System power is on, but the BIOS has not yet initialized the chipset.
Mechanical is off, and the operating system has not saved any context
Off
to the hard disk (soft-off state).
DC power is still on. The operating system has saved context and
1
Slow blink
gone into a level of low-power state (sleep state).
Steady on System and the operating system are up and running (working state).

Table 20. System Status LED Indicator States

Criticality
Not ready System not ready: Post error/NMI event/PCI or terminator missing
Ok System booted and ready
System degraded:

Non-critical temperature threshold asserted.

Non-critical voltage threshold asserted.

Non-critical fan threshold asserted.

Fan redundancy lost, sufficient system cooling maintained. This
does not apply to non-redundant systems.
Degraded

Power supply predictive failure.

Power supply redundancy lost. This does not apply to non-
redundant systems.

Correctable errors over a threshold of 10 and migrating to a spare
DIMM (memory sparing). This indicates the user no longer has
spared DIMMs indicating a redundancy lost condition.
Corresponding DIMM LED should light up.1
Intel order number E44588-003
State
HDD access
No hard disk activity
Off
Description
Description
Front Control Panel
Description
29