Power/Sleep Led; System Status Led; Table 61. Power Led Operation; Table 62. System Status Led Operation - Intel H2000WP Technical Manual

Front Panel Control and Indicators
7.2.1

Power/Sleep LED

State Power Mode
Power Off Non-ACPI
Power On Non-ACPI
S5 ACPI
S1 Sleep ACPI
S0 ACPI
Note: Blink rate is ~ 1Hz at 50% duty cycle.
7.2.2

System Status LED

Color State
Off N/A Not ready
Green/ Both Solid Not ready
Amber On
Green Solid on Ok
Green Blink Degraded
Amber Blink Non-critical
Revision 1.6

Table 61. Power LED Operation

LED
Off System power is off and the BIOS has not initialized the chipset.
Solid On System power is on but the BIOS has not yet initialized the
chipset.
Off Mechanical is off and the operating system has not saved any
context to the hard disk.
Blink DC power is still on. The operating system has saved context and
gone into a level of low-power state.
Solid On System and the operating system are up and running.

Table 62. System Status LED Operation

Criticality
Power off or BMC initialization completes if no degraded, non-
critical, critical, or non-recoverable conditions exist after power cable
plug in.
Pre DC Power On – 15-20 second BMC Initialization when AC is
applied to the server. The system will not POST until BMC
initialization completes.
System ready.
BIOS detected.
1. Unable to use all of the installed memory (more than one DIMM
installed).
2. In a mirrored configuration, when memory mirroring takes place
and system loses memory redundancy. This is not covered by
1
(2).
3. PCI Express* correctable link errors.
Integrated BMC detected.
1. One of redundant power supplies not present.
2. CPU disabled – if there are two CPUs and one CPU is disabled.
3. Fan alarm – Fan failure. Number of operational fans should be
more than minimum number needed to cool the system.
4. Non-critical threshold crossed – Temperature, voltage, power
nozzle, power gauge, and PROCHOT2 (Therm Ctrl) sensors.
5. Battery failure.
6. Predictive failure when the system has redundant power
supplies.
Non-fatal alarm – system is likely to fail.
BIOS Detected
1. In non-mirroring mode, if the threshold of ten correctable errors
is crossed within the window.
2. PCI Express* uncorrectable link errors.
Integrated BMC Detected
1. Critical threshold crossed – Voltage, temperature, power nozzle,
power gauge, and PROCHOT (Therm Ctrl) sensors.
2. VRD Hot asserted.
3. One of the redundant power supplies failed.
Intel order number: G52418-006
®
Intel Server System H2000WP Family TPS
Description
Description
1
1
67