Appendix A: Integration And Usage Tips - Intel SR1630BC Technical Product Specification

®
Intel Server Board S5000VCL TPS

Appendix A: Integration and Usage Tips

This section provides a list of useful information unique to the Intel
that you should keep in mind while integrating the server system.

®
The Intel Server System SR1630BC requires the use of a shielded LAN cable to
comply with Immunity regulatory requirements.
 ®
Intel Remote Management Module 3 is not supported the Intel
SR1630BC.
 ®
The Intel Server system SR1630BC supports one riser card that supports one low-
profile half-length PCI Express* x8 add-in card which consumes power less than 15 W.

Processor fans are not needed and are not supported. The system fan module provides
the necessary cooling needed for the system.

You must use the system air duct to maintain system thermals.

System fans are not hot-swappable.

A screw on the front edge of the top cover is required when the unit is installed in a user-
accessible environment.

The FRUSDR utility must be run to load the proper sensor data records for the server
chassis onto the server board.

Make sure the latest system software is loaded. This includes the system BMC firmware,
FRUSDR, and BIOS. You can download the latest system software from:
http://support.intel.com/support/motherboards/server/S5500BC/
Revision 1.3
Intel order number E44588-003
Appendix A: Integration and Usage Tips
®
Server System SR1630BC
®
Server System
43