Front Panel Led And Control Button Features Overview; Table 37. 30-Pin Front Panel Connector Pinouts; Table 38. Power/Sleep Led Functional States - Intel S2600WF Technical Product Specification

Intel® Server Board S2600WF Product Family Technical Product Specification
The pinout for both connector types, shown in Table 37, is identical.
PU_FM_SIO_TEMP_SENSOR
LED_NIC_LINK2_ACT_FP_N
LED_NIC_LINK2_LNKUP_FP_N
7.2.1

Front Panel LED and Control Button Features Overview

7.2.1.1 Power/Sleep Button and LED Support
Pressing the power button toggles the system power on and off. This button also functions as a sleep button
if enabled by an ACPI-compliant operating system. Pressing this button sends a signal to the integrated BMC,
which powers on or powers off the system. The power LED is a single color and is capable of supporting
different indicator states as defined in Table 38.
Power Mode LED
Off
Non-ACPI
On
Off
ACPI
On
7.2.1.2 System ID Button and LED Support
Pressing the system ID button toggles both the ID LED on the front panel and the blue ID LED on the back
edge of the server board. The system ID LED is used to identify the system for maintenance when installed in
a rack of similar server systems. The system ID LED can also be toggled on and off remotely using the IPMI
"Chassis Identify" command which causes the LED to blink for 15 seconds.
7.2.1.3 System Reset Button Support
When pressed, this button reboots and re-initializes the system.
7.2.1.4 NMI Button Support
When the NMI button is pressed, it puts the server in a halt state and causes the BMC to issue a non-
maskable interrupt (NMI) for generating diagnostic traces and core dumps from the operating system. Once
an NMI has been generated by the BMC, the BMC does not generate another NMI until the system has been
reset or powered down.
86

Table 37. 30-pin front panel connector pinouts

Signal Name
P3V3_AUX
KEY
FP_PWR_LED_BUF_R_N
P3V3
LED_HDD_ACTIVITY_R_N
FP_PWR_BTN_N
GROUND
FP_RST_BTN_R_N
GROUND
FP_ID_BTN_R_N
FP_NMI_BTN_R_N
KEY

Table 38. Power/sleep LED functional states

System State
Power-off System power is off and the BIOS has not initialized the chipset.
Power-on System power is on
S5 Mechanical is off and the operating system has not saved any context to the hard disk.
S0 System and the operating system are up and running.
Pin# Pin# Signal Name
1 2
4
5 6 FP_ID_LED_BUF_R_N
7 8 FP_LED_STATUS_GREEN_R_N
9 10 FP_LED_STATUS_AMBER_R_N
11 12 LED _NIC_LINK0_ACT_FP_N
13 14 LED _NIC_LINK0_LNKUP_FP_N
15 16 SMB_SENSOR_3V3STBY_DATA_R0
17 18 SMB_SENSOR_3V3STBY_CLK
19 20 FP_CHASSIS_INTRUSION
21 22 LED_NIC_LINK1_ACT_FP_N
23 24 LED_NIC_LINK1_LNKUP_FP_N
27 28 LED_NIC_LINK3_ACT_FP_N
29 30 LED_NIC_LINK3_LNKUP_FP_N
Description
P3V3_AUX
P5V_STBY
KEY