Table 25. Power/Sleep Led Functional States - Intel R1000GZ Technical Product Specification

Amber Solid on
G – Power/Sleep Button – Toggles the system power on and off. This button also functions as a sleep button
if enabled by an ACPI compliant operating system. Pressing this button will send a signal to the integrated
BMC, which will either power on or power off the system. The integrated LED is a single color (Green) and is
capable of supporting different indicator states as defined in the following table.
State Power Mode
Power-off Non-ACPI
Power-on Non-ACPI
S5 ACPI
S4 ACPI
S3-S1 ACPI
S0 ACPI
H- Drive Activity LED - The drive activity LED on the front panel indicates drive activity from the on-board
hard disk controllers. The server board also provides a header giving access to this LED for add-in controllers.
42
®
Intel Server System R1000GZ/GL Product Family TPS
Critical, non- Fatal alarm – system has failed or shutdown:
recoverable – 1. CPU CATERR signal asserted
System is halted 2. MSID mismatch detected (CATERR also asserts for this case).
3. CPU 1 is missing
4. CPU Thermal Trip
5. No power good – power fault
6. DIMM failure when there is only 1 DIMM present and hence no good
memory present
7. Runtime memory uncorrectable error in non redundant mode.
8. DIMM Thermal Trip or equivalent
9. SSB Thermal Trip or equivalent
10. CPU ERR2 signal asserted
11. BMC\Video memory test failed. (Chassis ID shows blue/solid-on for this
condition)
12. Both uBoot BMC FW images are bad. (Chassis ID shows blue/solid-on
for this condition)
13. 240VA fault
14. Fatal Error in processor initialization:

Table 25. Power/Sleep LED Functional States

LED
Off System power is off, and the BIOS has not initialized the chipset.
On System power is on
Off Mechanical is off, and the operating system has not saved any context
to the hard disk.
Off Mechanical is off. The operating system has saved context to the hard
disk.
1
Slow blink DC power is still on. The operating system has saved context and
gone into a level of low-power state.
Steady on System and the operating system are up and running.
Revision 1.1
1
.
a. Processor family not identical
b. Processor model not identical
c. Processor core/thread counts not identical
d. Processor cache size not identical
e. Unable to synchronize processor frequency
f. Unable to synchronize QPI link frequency
Description