Epcs (Enhanced Paging & Code Squelch) Function; Setting The Code For Your Station - Yaesu FTM-6000R Advance Manual

EPCS (Enhanced Paging & Code Squelch) Function
When using FTM-6000R/E transceivers with a group of friends, setting the Two-Tone
CTCSS personal codes allows calling just the specific stations. Even when the person
who is called is not near the transceiver, the information on the LCD indicates that a call
was received.

Setting the Code for Your Station

Set the "pager code" to be called by other stations.
1. Press and hold the [F menu] key.
2. Rotate the DIAL knob to select [15 PAGER] then
press the DIAL knob.
"PAG.CDR" is displayed on the screen.
3. Press the DIAL knob.
4. Rotate the DIAL knob to select the first tone of the
code from 01 to 50.
5. Press the DIAL knob.
6. Rotate the DIAL knob to select the second tone of
the code from 01 to 50.
The same code cannot be used for first tone and
second tone.
7. Press the [SQL back] three times to save the setting and return to normal operation.
• The reverse combination works as the same code, that is "05 47" is the same as "47 05".
• If the same code is specified for all individuals, all the individuals can be called at the same
time.
• The default code is "05 47".
7