Table of Contents
Advertisement
FRG "F
You may access other Internet Link Systems (including WIRES™ in the "FRG" mode)
that use a DTMF string for access.
Programming the FRG code
1. Load the DTMF tones which you wish to use for Internet-link access into a Internet
Memory register. For purposes of this example, we will use "#(F)1101D" as the access
code (the "#" key is denoted by the letter "F").
Press the [ F/W ] key, then press the [ 0 ( SET )] key to enter the Set
2
mode.
3
Rotate the DIAL knob to select Set Mode Item 32:
Press the [ 0 ( SET )] key to enable adjustment of this Set Mode
4
Item.
5. Rotate the DIAL knob to select the Internet Memory register
F 0
F63
(
~
) into which you wish to store the access code.
6. Press the [ MODE ( SP S ) SQ TYP ] key momentarily. The first
digit will blink.
7. Rotate the DIAL knob to select "
the first digit of the DTMF string).
8. Press the [ MODE ( SP S ) SQ TYP ] key momentarily to accept
the first digit and move to the second digit of the DTMF string.
9. Repeat the previous steps until you have completed the access code ("#(F)1101D").
10. If you attach an alpha/numeric name "Tag" to the Internet Memory, proceed to the
next step; otherwise press and hold in the [ 0 ( SET )] key for one second to save the
setting.
11. Press the [ V/M ( DW ) MT ] key momentarily to enable program-
ming of the name tag.
12. Rotate the DIAL knob to select the first digit of the desired label.
13. Press the [ MODE ( SP S ) SQ TYP ] key to move to the next character.
14. If you make a mistake, press the [ BAND ( SCN ) BND DN ] key to
back-space the cursor, then re-enter the correct letter, number, or
symbol.
15. Repeat steps 12 through 14 to program the remaining letters,
numbers, or symbols of the desired label. A total of six characters may be used in the
creation of a label.
16. When you have programmed a label which is under 6 characters, press the [ 0 ( SET )]
key to confirm the label.
17. Repeat steps 1 through 16 to store other access codes, if so desired.
18. Press the PTT switch to save the setting and exit to normal operation.
VX-6R O
I
R
F
" (representing DTMF "#":
M
C
G
"
INT.SET
.
F
71
Advertisement
Table of Contents
