Saving Uefi Configuration Settings; Booting And Installing The Operating System - HP Integrity BL860c i2 User's & Service Manual

To configure specific devices, press D or d to launch the Device Manager. This is an advanced
feature and should only be performed when directed.
To perform maintenance on the system such as adding, deleting, or reordering boot options, press
M or m to launch the Boot Maintenance Manager.
To perform more advanced operations, press S or s to launch the UEFI Shell.
To view the iLO 3 LAN configuration, press I or i to launch the iLO 3 Setup Tool.

Saving UEFI configuration settings

There are other UEFI settings you can configure at this time. For more UEFI configuration options,
see Appendix A (page

Booting and installing the operating system

From the UEFI Front Page prompt, you can boot and install in either of two manners:
If your OS is loaded onto your server blade, see
blade" (page
If the OS is not installed onto your server blade, see
the server blade" (page
28 Installing the server blade into the enclosure
133).
29).
29).
"Operating system is loaded onto the server
"Operating system is not loaded onto