HP Integrity BL860c i2 User's & Service Manual page 69

X: Exit Connection
[ilo002264fee2de] hpiLO-> cm
(Use Ctrl-B to return to MP main menu.)
[ilo002264fee2de] CM:hpiLO-> sr
SYSREV
Revisions
---------------------------------------------------------
iLO FW
System FW
MHW FPGA
Power Mon FW
Front Panel HW : 04.00
PRS HW
IOH HW
4. Compare the first four Revisions lines with the version information listed in the release notes
at www.hp.com for the current server blade, HP Smart Update Firmware bundle. If any of the
firmware revisions are less than those in the release notes, then the server firmware must be
updated.
OA
Use one of the following methods to determine the current OA firmware version:
OA GUI — Connect to the OA GUI, expand the Active Onboard Administrator section of the
left sidebar menu, and select Firmware Update. The Firmware Version is listed under Firmware
Information.
OA CLI — Log in to the OA CLI through the serial console port or LAN and enter show oa
info at the command prompt.
OA8> show oa info
Onboard Administrator #1 information:
Active Pending
: 01.41.01
: 01.80
: 02.00
: 03.04
: 02.07
: 02.02
Bay 5 Bay 6
01.41.01 01.41.01
01.80 01.80
02.00 02.00
03.04 03.04
04.00 04.00
02.07 02.07
02.02 02.02
Installing internal components 69