HP Integrity BL860c i2 User's & Service Manual page 97

LOCATOR
POWER
Table 1 1 Indications for the iLO 3 TUI LEDs
VFP LED Purpose
HEALTH Represents the health of
the entire
system/partition. Shows
the worst health case of
any blade that is part of
the partition.
SYSTEM There is only one
SYSTEM LED per
partition. The state will
be the same for every
blade in the partition.
Equivalent Indications
System Health LED in the Flashing
iLO 3 GUI's Virtual Front amber
Panel
Flashing
red
Steady
green
Off
Flashing
System Event Log
red
Health as displayed
on the System Health
page in the iLO 3
Steady
GUI
green
There is no physical
Off
LED on the blade's
front panel that
represents this state.
Value
Health of the partition and the health of
one or more blades within the partition is
DEGRADED, meaning that:
A FRU has failed
A fatal event has been logged Level
seven alert events cause this indication
if there are no FRU failures.
NOTE: if the SYSTEM LED lights red,
this counts as a FRU failure for the
HEALTH LED.
Health of the partition is FATAL and the
health of one or more blades within the
partition are FATAL, meaning that:
A FRU has failed and A fatal event has
been logged (Level seven events cause
this indication if there are FRU failures
on one of the blades in the partition.)
A reset will clear this LED of a fatal event,
but not a FRU failure. A power cycle will
clear both.
All internal FRUs in the partition are
healthy, there are no fatal events, and the
system power is on.
Power to the system/partition is off and
there were no AMBER or RED HEALTH
indications on the last boot.
There has been a FATAL event since the
last power on or system reset.
A reset or power on will clear this LED.
System is beginning to boot the OS
OS is not booting and there are no fatal
events.
Troubleshooting tools 97