A Utilities; Configuring A Smart Array Controller; Using The Saupdate Command; Get_Mode - HP Integrity BL860c i2 User's & Service Manual

A Utilities

Configuring a Smart Array Controller

Using the saupdate command

The saupdate command is used to query or change the mode of the Smart Array P410i and
Smart Array P41 1 controllers to HBA or RAID. Querying or changing modes is not supported for
other controllers.
The following are the newly added commands to saupdate:

get_mode

set_mode
get_mode
This command displays the current mode of the controllers.
Syntax
saupdate get_mode <controller>
<controller> can be any one of the strings listed in
Table 14 <controller> strings
<controller>
<seg:bus:dev:func>
all
<model>
Table 14.
Meaning
A controller having the PCI segment id, bus id, device id
and function id is addressed
Addresses all controllers in the system
Controllers of a particular type indicated by the <model>
string are addressed
Configuring a Smart Array Controller 133