Saving Uefi Configuration Settings; Booting And Installing The Operating System - HP Integrity rx2800 i4 User Manual

Figure 17 Device Manager screen
To perform maintenance on the system such as adding, deleting, or reordering boot options, press
M to launch the Boot Maintenance Manager.
Figure 18 Boot Maintenance Manager screen
To perform more advanced operations, press S to launch the UEFI Shell.
To view the iLO LAN configuration, press I to launch the iLO Setup Tool.

Saving UEFI configuration settings

You can configure other UEFI settings at this time. For more UEFI configuration options, see the HP
Integrity rx2800 i4 Server User Service Guide.

Booting and installing the operating system

From the UEFI Front Page prompt, you can boot and install in either of two manners:
If your OS is loaded onto your server, see
(page 31).
If the OS is not installed onto your server, see
(page 31).
30 Installing the server
"Operating system is loaded onto the server"
"Operating system is not loaded onto the server"
HP Confidential