4.
Remove any mezzanine card installed in slot 2
5.
If installed, remove the BBWC battery
6.
Remove the battery mounting bracket
Removing the BBWC battery
CAUTION:
If you must remove the cache module to transfer data, the battery must remain
connected so that the data is preserved. If you must keep the battery connected to the cache module,
follow the steps for 512MB cache module removal
of using this procedure.
1.
Back up all data.
2.
Close all applications.
3.
power off the server blade and remove it from the server blade enclosure
server blade for
servicing").
4.
Remove the access panel
5.
Remove the DIMM baffle
6.
Lift up on the battery to remove it from the battery bracket.
7.
Push the battery cable down and towards the rear of the server blade to push it out of the
battery bracket's C-hook.
("Mezzanine cards" (page
("Removing the BBWC
("Removing the 512MB cache
("Access panel" (page
("DIMM baffle" (page
battery").
113)).
115))
Installing internal components
123)).
module") instead
("Preparing the
61