Verifying Site Preparation; Inspect The Shipping Containers For Damage; Unpacking The Server Blade; Verifying The Inventory - HP Integrity BL860c i2 User's & Service Manual

Verifying site preparation

Verifying site preparation is an essential factor of a successful server blade installation, and includes
the following tasks:
Gather LAN information. Determine the two IP addresses for the iLO 3 MP LAN and the server
blade LAN.
Establish a method to connect to the server blade console. For more information on console
connection methods, see
Verify electrical requirements. Be sure that grounding specifications and power requirements
are met.
Confirm environmental requirements.

Inspect the shipping containers for damage

HP shipping containers protect their contents under normal shipping conditions. After the equipment
arrives, carefully inspect each carton for signs of shipping damage. Shipping damage constitutes
moderate to severe damage such as punctures in the corrugated carton, crushed boxes, or large
dents. Normal wear or slight damage to the carton is not considered shipping damage. If you find
shipping damage to the carton, contact your HP customer service representative immediately.

Unpacking the server blade

1. Use the instructions printed on the outside top flap of the carton.
2. Remove inner accessory cartons and the top foam cushions.
IMPORTANT:
3. Place the server blade on an antistatic pad.

Verifying the inventory

The sales order packing slip lists the equipment shipped from HP. Use this packing slip to verify
that the equipment has arrived.
NOTE: To identify each item by part number, see the sales order packing slip.

Returning damaged equipment

If the equipment is damaged, immediately contact your HP customer service representative. The
service representative initiates appropriate action through the transport carrier or the factory and
assists you in returning the equipment.
14 Site preparation
"Using iLO 3" (page 25)
Inspect each carton for shipping damage as you unpack the server blade.
for more information.