Scan; Camera; Tally Mapping; Camera Control - Datavideo 4K ShowCast STUDIO Instruction Manual

Main Sub-Menu
Enter

Scan

Select to scan for the connected cameras.

Camera

This provides a list of the connected cameras. Select one to configure.

Tally Mapping

Select and assign a tally channel to the selected camera from the list below:

Input 1

Input 2

Input 3

Input 4

Camera Control

Select a camera control protocol from the list below for connecting the cameras.
 DVIP
 RS-422
 RS-232

Baud Rate

If RS-422 or RS-232 is selected, select a baud rate from the list below:

9600

19200

38400

57600

115200
IP
IPs of the cameras will be listed here if connected via DVIP.

Camera Info

This field provides camera information display such as Vendor ID, MB Version, FPGA Version, Motor
Version and DVIP Version.

Model

This field shows the model number of the selected camera.

Video Format

This sets the video format of the selected camera. The available resolutions are listed as follows:

2160p/60/59.94/50/30/29.97/25/24/23.98

1080p/60/59.94/50/30/29.97/25/24/23.98

1080i/60/59.94/50

720p/60/59.94/50
Options or Values
39
Default Value