Menu Options - Datavideo HS-2800 Quick Start Manual

Menu Options

When the ENTER button is pressed the Main Menu list is displayed on the HDMI 1
Multi-view output.
This section covers the Menu options in the order that they appear on the
SE-2800 HDMI 1 Multi-view. These settings may also appear in more detail
elsewhere in this instruction manual. Options may vary depending on the firmware
version in use.
Once the chosen setting has been confirmed with the ENTER button it is stored within the switchers non-volatile
memory.
Version Number
Input Video Settings
Inputs Standard and Format
Input Audio Settings
SDI Embedded Audio Set.
HDMI in Embedded Audio Pair
Outputs Emb Audio Group
Auto Audio Mixing Type
T-Bar Audio Mixing Type
PIP Settings
V.xx.xx - where xx.xx is the firmware version number
Brightness
Contrast
Saturation
Aperture
Y-C Delay
Set To Nominal
Inputs 1,2,5,6,9 &10
Inputs 3,7 &11
Inputs 4,8 &12
*All HD inputs are natively 16:9 aspect.
Level Range -60 to +60
Nominal Resets value to zero
User choice of
Inputs 1 to 12
Input 4,8 or 12 User choice of
Outputs 1,2 or 3 User choice of
X type or V type
User choice of
Tick selection
Follow auto audio mixing type (use above option)
Tick selection of
By the end (clean cut or immediate audio switch)
Position PIP1
X-Position
Size PIP1 Y-Position (Lower to Upper) = 000 to 108
22
Range xx to xx
Range xx to xx
Range xx to xx
Not used in current firmware
Not used in current firmware
Reset to default values
Can be a choice of
Can be a choice of
Can be a choice of
or
Group 1,2,3 or 4
Pair
Group 1,2,3 or 4
Group 1,2,3 or 4
X type = A/B cross fade
V type = Fade out A then Fade in B
(Left to right)
HD SDI*
SD SDI 4:3
SD SDI 16:9
HD SDI*
SD SDI 4:3
SD SDI 16:9
HD SDI*
SD SDI 4:3
SD SDI 16:9
HDMI*
HDMI SD 4:3
HDMI SD 16:9
1 or 2
= 000 to 097